How to install glass partitions
What is a glass partition? We have all seen glass partitions, which are commonly used in office decoration. All steel glass partitions are fire-resistant, environmentally friendly, and reusable, and are very popular among consumers. So where are the suitable places to install glass partitions? I believe many of you may not be familiar with this issue. Below, we will analyze the suitable space for installing glass partitions and the installation methods for glass partitions.Office glass partitions are used to distinguish indoor space facades. Those that extend from the ground to the ceiling are called high partitions, while those that do not reach the ceiling are called half high partitions (low partitions). The characteristics of glass partitions are good lighting, excellent sound insulation and fire resistance, environmentally friendly and easy to install, reusable, and maintenance free. Single glass partition, also known as single-layer glass partition, is a partition wall composed of single-layer glass and aluminum metal profiles. It has good space and low cost. Double glass partition, also known as double-layer glass partition, is a partition wall composed of double-layer glass and aluminum metal profiles. It is sturdy, durable, and has a stronger overall feeling. In addition, various louvers are added in the middle of the double-layer glass to achieve more effects.The typical usage areas for partition wall products can be considered as follows:1. Meeting rooms, negotiation rooms, design rooms, and similar areasOptional with crossbar type, double-sided tempered glass composition of 6mm+8mm. Because the sound insulation coefficient of this combination is very high, it meets the requirements of quietness and anti-interference in the above places. Horizontal design can reflect a grand and stable effect.2. Areas such as the chairman's office and the general manager's officeOptional built-in louver type, with double-sided tempered glass composition of 5mm+6mm. Because the sound insulation coefficient of this combination is relatively high, it meets the privacy requirements of the above places. The built-in blinds also enhance the ability to communicate with the external environment, making it more approachable.3. Large office areas and similar areasThe spacious and bright working environment reflects a modern atmosphere and management style, and the mutual communication among employees will greatly improve their work efficiency and satisfaction. Therefore, single-sided glass edge placement and double-sided glass types can be selected.4. Areas such as car exhibition halls.Display and sales are becoming increasingly closely linked. Because the staff not only need to timely understand the situation in the exhibition hall and communicate with multiple customers, but also need to have private negotiations with individual customers. Therefore, the selection of no crossbar type is suitable.5. Some areas within industrial enterprises.This type of area typically serves multiple functions including production, research, and office. So it is necessary to use a reasonable combination of glass partitions (walls) and solid partitions (walls) to makeMeasuring reality with moderation is more practical.How to install glass partitions1. Snap line: Based on the floor design elevation horizontal line, measure along the wall height to the ceiling design elevation, snap the vertical elevation line of the glass partition and the horizontal line of the sky and earth keel along the wall, and mark the grading position line of the keel on the horizontal line of the sky and earth keel.2. Ground bone installation: Fix the sky and earth keel according to the design requirements. If there are no design requirements, it can be fixed with 8mm to 12mm expansion bolts or 3-5 inch nails. The spacing between the expansion bolt fixing points is 600-800mm. Before installing the glass partition, anti-corrosion treatment should be done.3. Installation of main keel: The glass partition should be fixed with 4-inch iron nails according to the design requirements and the position of the dividing line. Each end of the keel should be fixed with no less than three nails. Glass partitions must be securely installed.4. Installation of small keels: Glass partitions shall be fixed with small keels according to the design requirements and the position of the dividing line, and fixed with tenons or nails. It must be securely installed. Before installing the dragon bone, a glass groove can also be opened on the dragon bone according to the specifications of the installation glass.5. Installation of glass: Install on the small keel according to the design requirements and glass specifications; When installing with a pressure strip, first fix the pressure strip on one side of the glass, and place a rubber pad under the glass, then use the pressure strip to fix the glass; If glass is directly fixed with glass glue, the glass should be installed in the reserved groove of the small keel first, and then sealed and fixed with glass glue.7. Installation of pressure strips: According to the design requirements, various specifications and materials of pressure strips are used to fix the glass partition to the small keel with straight nails or glass glue. If there are no design requirements for glass partitions, 10 × 12mm wooden pressure strips, 10 × 10mm aluminum pressure strips, or 10 × 20mm stainless steel pressure strips can be selected as needed.What should be paid attention to when installing glass partitions1. First locate the size; Any decoration will involve dimensions, and partition installation is no exception. At the beginning of the design, it is necessary to position the glass partition at a specific location and start measuring the dimensions once the position is clear. First, mark the positioning line on the installation ground, and then mark the height position line on the wall or column. When marking, be sure to be meticulous and minimize errors as much as possible to avoid unnecessary trouble for the installation program.2. Assembling the frame: When using glass as a partition, as it is a fragile material, a solid frame is needed to protect it. Before installing the partition, you can pre install the frame and assemble the entire or partial structure on a flat ground to facilitate better installation and fixation.3. Fixed glass: After the pre installation process of assembling the frame is completed, it is necessary to further fix the glass, such as fixing many bolts one by one, so that the profiles inside the frame cannot move. Of course, if the frame is necessary, it needs to be welded to prevent the frame from being firmly fixed and dislocated.
